Whirlpool Dryer WED5800SW0 Won't start or doesn't start

The Whirlpool Dryer Door Switch is an OEM replacement part that is compatible with a wide range of Whirlpool, Kenmore, and Maytag dryer models. This high-quality replacement part ensures that your dryer door is properly closed, allowing your appliance to operate smoothly and efficiently. 

If you're experiencing any of the following symptoms, it's time to replace your dryer door switch. Don't wait until your dryer stops working altogether – replace this part today and get your appliance back to peak performance! 

Causes of a bad part:

• Wear and tear from regular use
• Moisture damage from the dryer's steam cycle

The Dryer Drive Motor is an OEM replacement part compatible with Whirlpool dryers. This high-quality motor features a durable construction and provides reliable performance, ensuring your dryer runs smoothly.

Recommended related items:

• Belt 341241
• Idler pulley WP691366
• Drum rollers 349241T

Causes of a bad part:

• Overheating
• Wear and tear
• Electrical failures

Symptoms of a bad part:

• Dryer drum not turning
• Unusual noise
• Burning smell

This OEM replacement motor is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

This Dryer Door Latch Kit is an OEM replacement part compatible with Whirlpool dryers.  

Features and Benefits:

• Designed to secure the dryer door during operation and prevent accidental opening
• Helps to maintain safe and efficient dryer operation
• Easy to install with basic tools, ideal for DIY maintenance

 The Door latch kit includes:

• 3 different door catches to fit your specific model, green, yellow and blue.
• 2 strikes
• Instruction sheet

 Please refer to your appliance's parts list to verify compatibility.

The Belt is an OEM part compatible with Whirlpool dryers. It acts as a transmission to power the drum rotation during the drying cycle. The belt reliably conveys motion from the motor to the drum, ensuring garments are properly tumble-dried. 

Symptoms of a bad belt include: 

• The drum not turning or rotating slowly 
• Excessive noise and vibration coming from the dryer
• The belt slipping off the pulley
• Discoloration, cracking, or fraying of the belt

Causes of a bad belt can be normal wear and tear over time, overloading the dryer with too many wet items, or structural damage to the belt itself. 

This genuine OEM Whirlpool part is compatible with many other brand dryers including Maytag, KitchenAid, Affresh, Roper, and some Kenmore models for dependable performance.

The Relay is an OEM component compatible with Whirlpool dryers. Located inside the control board, this relay switches electric current to various heating and motor functions.

Symptoms of a faulty relay include:

• Failure to power on despite correct switch usage
• Inconsistent cycling between programmed stages
• Blinking error notifications on the display
• Safety trips or thermal cutoffs engaging

Common causes relate to degraded insulation from heat exposure gradually disrupting circuit regulation. Over time mechanical switching may experience reduced contact quality as well.

This Whirlpool OEM part is a compatible replacement for Jenn-Air and Amana models using identical Whirlpool mechanisms.

Looking for a reliable and high-quality OEM replacement part to repair your 29-inch large-capacity dryer? Look no further than the  Dryer repair kit. Sourced directly from Whirlpool.

The kit includes:

• One Dryer belt (341241)
• Drum support roller kit (349241T)
• One idler pulley (WP691366)
• Instructions.

While some parts in this kit may not fit your specific model, you can use your model number to check for the specific parts you need. This ensures that you have the right parts for your particular dryer and can make the repair process as smooth and straightforward as possible.

Includes screws and wire connectors. For the complete terminal block kit use 279320.

The Whirlpool dryer door catch is an OEM replacement part responsible for keeping the dryer door securely closed during operation. It latches onto the door strike and hold the dryer door in place when it is closed. It consists of a small plastic or metal component that protrudes from the front panel and engages with the door strike to keep the door closed.

The Whirlpool door catch can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms:

• The dryer door not staying securely closed during operation
• Difficulty in latching or unlatching the door
• Visible damage or signs of wear on the door catch
• The door catch not engaging with the door strike
• The dryer not starting or operating when the door is closed

The Terminal Block Screw Kit is an OEM component compatible with Whirlpool dryers. It is an assembly of screws used to securely fasten electrical terminal blocks within the dryer's control panel. 

The terminal blocks facilitate safe, orderly connections between various heating elements, sensors, motors, and other internal wiring. The terminal block screws play an important safety role by firmly securing these electrical joints to prevent overheating, shorts, or premature failure.

Symptoms of a faulty terminal block screw kit include:

• Intermittent power or failure of heating/fan elements to engage  
• Repeated blowing of internal fuses or tripping of circuit breakers
• Hot terminal connections detected during operation
• Arc flashes, sparks, or smoke seen around the control panel area

Includes 3 screws and 3 nuts. Screw kit for dryer cord connector.

This genuine Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.