Whirlpool Dryer WED6400SW0 Noisy

"My Whirlpool WED6400SW0 dryer Noisy"... humming noise, rattling or screeching - I know, I’ve seen it all before. On this page, I have the instructions and the parts you need to identify and fix the problem. Troubleshooting the "Noisy" problem for your Whirlpool WED6400SW0 dryer shouldn’t be difficult and I’m here to help!

Lets get your WED6400SW0 Dryer fixed

Here are the most common causes for Whirlpool Dryer WED6400SW0 "Noisy"

55% of the time Dryer Repair Kit (most 29 Inch Large Capacity Models)

Dryer was squeaking very badly!

I disassembled the dryer, cleaned all the lint out(it was everywhere and I'm surprised it had not caught on fire), sprayed lubricant on the idler pulley and the rollers. Then I put everything back together and used the dryer. It was quiet but, short lived. I bought the "Dryer Repair Kit" from AppliancePartsPros. It had a new belt and idler /tension pulley that I may not have needed but, I thought, "if I'm taking it apart again, I'm replacing everything!" I followed the video instructions and the dryer is now like new. The plastic retaining clips (4) for the rollers were much more difficult to remove and replace than shown in the video. Other than that, everything went EZ PZ. My wife came home at the end of the job and helped me by holding the drum in place while installed the front of the dryer. I don't know if I could have done it alone. I know we saved a bunch by doing ourselves AND.....the parts came in less than 24 hours. I could not have scheduled a repairman in that time.

Broken drive belt

Ordered your repair kit based on my model number. It arrived 2 days later, unfortunately it was short 4 nylon and one metal retainers. I called and was apologized to. The CSR quickly found my order and said a new parts kit would go out to me the same day. I was only looking for the missing parts but was politely told that if a customer has an issue she is there to take care of it. REMARKABLE! The new kit arrived in two days with all the parts and the problem is solved. Incredible service in this "to bad for you society". The video of the repair I was performing was very helpful. I'm very pleased.

Not heating

I ordered the heater element in my Whirlpool Estates dryer, watched the video and had it changed in no time. I also replaced the belt assembly. Appliance Parts Pros delivered!

Dryer making noise

Getting the dryer repair did the trick. Now I have a old dryer that sounds like new. A special to the person who took my order, she suggested the kit for me. Plus the parts were less expensive than from another source.

Dryer was making a lot of noise

Drum support rollers - actually the dryer repair kit came complete with the lock washers support wheels pulley and belt.

Fast same day shipping
365 days to return any parts

Dryer Repair Kit (most 29 Inch Large Capacity Models) for Whirlpool WED6400SW0 Noisy

$29.70 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP3131942
Fast shipping:
Yes
Returns:
365 days to return

This dryer repair kit is an OEM replacement part for Whirlpool dryers.

The kit includes:

While some parts in this kit may not fit your specific model, you can use your model number to check for the specific parts you need. This ensures that you have the right parts for your particular dryer and can make the repair process as smooth and straightforward as possible.

12% of the time Idler Pulley Assembly

Loud squealing noise.

Watched instructional video for replacement of idler pulley. Purchased part which was delivered the next business day even though I ordered it standard delivery. Repair took about an hour and is now good to go. No more noise. The video was fabulous. Thank you.

My 11 year old dryer was squealing and screeching when running

I ordered the new belt tensioner pulley and 2 new rear drum rollers. It turned out to be the tensioner pulley bearing had gone bad. Also, after taking the dryer apart I realized that I had 4 drum rollers not just 2. I replaced the rear rollers and cleaned up the front rollers and sprayed them with 100% silicone lubricant. The dryer runs like a charm and is as quiet as the day we purchased it. I can't say enough good things about Appliance Parts Pro. They are very informative, provide great prices and technical service. Their shipping is extremely fast and products are packaged well. Whirlpool Cabrio WGD6400SW0

Squeezing whirlpool cabrio dryer

Viewed video on "You Tube". The diagnosis and instructions on how to fix were accurate and very easy to follow. As someone like me who is not known for patience but more for temperament I couldn't have been more pleased with my success. I ordered the pully assembly @ 3pm and it arrived noon the next day by regular FEDEX GROUND. That beer tasted better then usual! Thank You, I'll be back.

Screeching sound coming from the dryer

I looked at a few YouTube videos. Determined it was either a drum bearing or the idler wheel. I opened up the dryer and found the idler had nearly disintegrated. I went to a Sears appliance parts store that didn't have the part in stock. Go figure! So, I went on line and ordered the part in seconds and had it in a couple of days. Had the dryer up and running in 20 minutes. Happy wife, happy life!

I contacted the appliancepartspro.com for a pulley part for my Whirlpool dryer

It was making a loud-clanging sound. My brother in- law pulled out the drum, saw the problem. I called appliancepartspros.com. They shipped to me on Tuesday. I had the part on Friday. It was repaired on Saturday. Thank you,! You guys are Great!!!

Fast same day shipping
365 days to return any parts

Idler Pulley Assembly for Whirlpool WED6400SW0 Noisy

$36.16 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP5983811
Fast shipping:
Yes
Returns:
365 days to return

This OEM Replacement Part is an idler pulley assembly for dryers. It includes a pulley, shaft, and arm. The idler pulley's primary function is to provide the necessary tension on the drive belt, enabling it to rotate the dryer drum effectively. This assembly is particularly suitable for Whirlpool dryers equipped with a lint screen on top.

The component that links the idler pulley to the wheel is the arm included in this assembly. The overall dimensions of this assembly are 7-1/8" in length, 1-1/4" in width, and 4-1/8" in height, ensuring it fits correctly into the specified dryer models. This part, sourced directly from the manufacturer, guarantees optimal compatibility and performance

11% of the time Drum Support Roller

The drum rollers needed to be changed

Your video on how to replace the drum roller was very helpful. Getting a part and a video on how to replace the part was an excellent service. I had no idea how to take the dryer apart. I’m very pleased

Drum support roller malfunctioned

Very simple repair. Remove the back of the dryer, removed old support roller and replaced it with a new roller provided by appliancepartspros.com. Took about 30 minutes and now the dryer works perfectly. Thank you appliancepartspros.com!

Dryer drum making a swishing noise.

Our Whirlpool dryer drum started making a swishing noise which I could reproduce by manually rotating the drum. I found an exploded parts diagram and determined that this was either the roller(s) or the belt and via a video I was able to figure out how to open the front of my dryer to diagnose this problem. Sure enough I found a bunch of small rubber shavings on the floor of the dryer and I ordered two drum support rollers. The rollers showed up on time and replacement was quick and easy! After I pulled the old rollers I was able to determine that the left roller had a more pointed edge profile than the new roller and there was a crack in the rubber around the central ring that connects the rubber on the roller to the roller (the middle). Right parts, right diagnosis, quiet dryer again. Always a good experience with AppliancePartsPros.com!

My Whirlpool duet dryer was clunking!

1. Searched the internet for causes. 2. Found AppliancePartsPros website and watched the video on how to fix the problem by replacing the 4 drum support roller. 3. Ordered the parts, which came the next day! 4. Played your video, pausing at each step, to follow the very clear directions. 5. My dryer works like new now - no more clunking. Not bad for a 65-year old lady!

Noisy

Watched your dryer video and found out through the video what was causing the noise problem, then ordered the parts from your company. Parts arrived next day. THANKS for making my life easier. You guys are great and have a great system. DON

Fast same day shipping
365 days to return any parts

Drum Support Roller for Whirlpool WED6400SW0 Noisy

$22.70 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP6019303
Fast shipping:
Yes
Returns:
365 days to return

This OEM Replacement Part is a drum support roller for dryers manufactured by Whirlpool, KitchenAid, Inglis, Maytag, and Crosley. This genuine Whirlpool part is sourced directly from the manufacturer and is sold individually. The drum support roller is responsible for securing the drum as it rotates and most dryers need two of them. It is essential to check and replace both drum support rollers to ensure proper drum rotation.

A faulty drum support roller can lead to loud squealing, squeaking, or thumping noises during dryer operation. It is recommended that this medium-difficulty repair be performed with caution. The power, gas, and vent lines should be disconnected before beginning. You may need pliers, a screwdriver, a nut driver, and a wrench to complete the replacement.

Note: This part includes the drum roller only. The tri-rings must be purchased separately.

5% of the time Blower Wheel

Dryer fan blower wheel broke loose from motor shaft making loud noise and preventing the dryer from drying properly

Replaced the fan. It required the complete dismantling of the dryer, but it wasn't difficult and the repair went well. (Watched a video on You Tube). But it took a little too long to get the part (8 days).

Fan broke on dryer.

Took the entire dryer apart and watched a video on how to do it.. Took us about 25 mins and the dryer works like new. So happy!!!!

The blower wheel was broken

I watched a repair video on how to replace the wheel. There was a link provided to order the replacement part. It was shipped and arrived in 3 days.

Growling and overheating motor.

First I had to replace the motor, however, as an ex professional Repair Technician, I happen to know that quite often, it is very difficult (if not impossible) to get the blower wheel off of the motor shaft. Especially since the models that use these blower wheels are quite old now (still good though). When this happens, the blower wheel must be chiseled apart to get the motor out. That said, I had to do this and after replacing the motor, it is very easy to spin the new blower wheel on to the motor. I would suggest to anyone changing the motor, to order the blower wheel as well since you may likely need it and won't have your dryer inoperative while ordering more parts.

Broken blower fan in maytag dryer

Used APP to id part. Ordered. Came fedx next morning. Me and youtube installed the fan. My kitchen laundry is back up and running! I am just an average guy so getting the right part so quickly made the repair go smoothly!

Fast same day shipping
365 days to return any parts

Blower Wheel for Whirlpool WED6400SW0 Noisy

$33.25 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP6010602
Fast shipping:
Yes
Returns:
365 days to return

The OEM Replacement Part is a Blower Wheel, designed for use in specific Whirlpool Dryer models. This 8 5/8" diameter wheel, is crafted to move air through the appliance effectively, utilizing a squirrel cage design. Its main function is to blow air through the dryer drum and out the exhaust, a crucial element in the drying process.

The blower wheel attaches to the motor shaft using left-handed threads and can be removed by unscrewing it clockwise off the motor shaft. It is particularly suitable for 29-inch models with a lint filter on top. This part is compatible with select Whirlpool brand models including Kenmore, and Roper.

3% of the time Drum Support Shaft for Left Hand Threads

Excessive noise and squeaking from rear drum support roller.

Repair required removing the front and rear of the dryer. After removing the roller and seeing how bad it was, I checked the shaft. It was scored badly. I subsequently ordered the shaft. I replaced both rear support rollers because if one failed, the other was probably not far behind. Cleaned the front rollers while I had it apart. Vacuumed up all the metal shavings from the failed roller. Overall, pretty labor intensive. I think the shaft was way overpriced, but other sites had it selling for similar amounts.

Originally received the wrong (longer) drum support shaft.

I called back on a Saturday to explain to the agent just what happened. I was sent the correct Shaft (no shipping charge), which arrived in two days! I am to be credited for the incorrect shaft. With a new Drum Support Shaft and Roller installed my Whirlpool Duet Sport dryer is once again running quietly.

Our Kenmore dryer had a horrible high pitch noise coming from it.

Contacted AppliancePartsPros.com. Found out that the parts I ordered 9 months ago were on warranty and they replaced them for me. Installed the repair parts and once again the dryer is fixed. No high-pitched noise at all! Very satisfied with the service from this company. Would highly recommend them to anyone.

Fast same day shipping
365 days to return any parts

Drum Support Shaft for Left Hand Threads for Whirlpool WED6400SW0 Noisy

$48.58 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP6020389
Fast shipping:
Yes
Returns:
365 days to return

The Whirlpool drum roller axle is an OEM replacement part responsible for supporting and facilitating the rotation of the drum in the dryer. It is designed with left-hand threads, which means it turns counterclockwise to secure the rear drum roller in place. The drum roller axle serves as the pivot point for the rear drum roller, allowing the drum to rotate smoothly during the drying cycle. It plays a pivotal role in maintaining the stability and balance of the drum, ensuring that it spins evenly and without wobbling.

The Whirlpool drum support shaft can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

  • Unusual noises during the drying cycle, such as squeaking, squealing, or thumping sounds
  • Excessive wear or damage to the rear drum roller
  • Clothes taking longer to dry than usual
  • The dryer vibrating excessively or shaking during operation

less than 1% of the time Drive Belt

Maytag Bravos dryer mod# MDE6400TQ0 was making a screeching noise.

A week ago I took the dryer apart. I used masking tape to wrap screw bundles, number them, and tag the area I took them out of with a number to facilitate finding the appropriate places for each type of screw when putting it back together. I also took a video of the wiring board layout before I unplugged any of the wires. Once open I found the following: - 2 inches in lint on everything inside of it. I thoroughly cleaned all of that out. - I found that the idler pulley, and one of the drum rollers had quite a bit of resistance to spinning so I applied WD-40 on the contact points between pins and rollers. I noticed that the - I noticed the belt had some metal fibers fraying out from it, and there was a dark streak on the drum where it looks like it had been slipping. I considered replaced it, but wanted to see what the cleaning and WD-40 did. I tested it after these tasks and it seemed to be working fine. The next time we used the dryer a couple of days later, the squealing started again. I went and tried to listen to where it was coming from exactly, and it sounded like it was coming from the motor itself. I went ahead and Ordered the belt, since it's never been replaced and the dryer is likely fairly old. Once the belt arrived, I opened up the dryer again down to the motor (same as before). Since the squealing sounded like it was coming from the motor, I figured out how to use a wrench on the fan, and the pulley on either side of the motor to get the fan off. I was then able to remove the motor. It was quite covered in lint (some rusty) throughout. I took it into a well-lit area and cleaned it thoroughly with a pipe cleaner. I then applied WD-40 to the magnetic wheel in the center since I could hear it rubbing a bit. I re-assembled it all and replaced the belt. It required some assistance from my partner to hold the drum in place while re-attaching the front panel. Probably not doable alone. Upon testing it, there was no sound. We'll see how it fares over the next few months. Hopefully it's fixed.

Broken drive belt on dryer.

I lifted the top and removed the front panel with the door attached, unplugged the door switch, and installed the belt. Reassembled and it did not work. Then I jumped out the door switch and presto was done.

Broken dryer belt

Ordered belt from you guys and followed your video. This is the second time we've used one for an appliance repair. They are brilliant! Clear and easy to follow. Very grateful for them.

Burning smell..

I watched the AppliancePartsPros.com video on YouTube to replace the belt on my Cabrio dryer, thank you.

The dryer drive belt was squeaking and slightly worn out.

I ordered the dryer drive belt for my dryer. Follow the repair video. Spot on. I have completed this repair twice now. The dryer is over 10 years old. It keeps on drying. Make sure you wear protective gloves so you don't cut your hands around dryer sharp sheet metal. Thank you ApplicanePartsPros.com

Fast same day shipping
365 days to return any parts

Drive Belt for Whirlpool WED6400SW0 Noisy

$81.79 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP6013154
Fast shipping:
Yes
Returns:
365 days to return

The Drive Belt is an OEM part for Whirlpool clothes dryers. Located inside the dryer cabinet, this poly-V belt links the motor to the tumbling drum.

Causes of a bad drive belt can include cracks or splits that develop from extended use over years of manual clothes drying. Improper tension may also contribute to early wear.

Symptoms of a bad drive belt include:

  • The dryer drum fails to turn or rotates slowly
  • A squealing belt slipping on the pulleys
  • Cracks, splits or visible wear on the belt surface
  • Motionless dryer and inability to initiate cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

less than 1% of the time Front Drum Roller Shaft

Fast same day shipping
365 days to return any parts

Front Drum Roller Shaft for Whirlpool WED6400SW0 Noisy

$49.84 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP6020388
Fast shipping:
Yes
Returns:
365 days to return

The Front Drum Roller Shaft is an OEM Replacement Part designed for the support of Whirlpool dryer drums. This component features right-hand threads. It serves as the structural axis on which the drum support rollers glide to support the drum. An updated part by the OEM, this shaft may necessitate the replacement of nuts on older models. This shaft is a necessary component if your existing one exhibits flat spots or the rollers stop spinning.

Installation of this part requires a 5/16 inch socket or nut driver, a 1/4 inch socket or nut driver, a small flathead screwdriver, channel-lock pliers, and a 9/16 inch socket. Before installation, remember to disconnect your appliance from its power source. Refer to the manufacturer's diagram for further instructions. This part is compatible with select Whirlpool brand models, including Admiral, Amana, Crosley, Inglis, Kenmore, Kitchen Aid, and Maytag,

Washer

Fast same day shipping
365 days to return any parts

Washer for Whirlpool WED6400SW0 Noisy

$0.00 Out of stock, Usually ships within 4 - 14 days
Add to cart
Made by:
Whirlpool
Part Number:
AP6014903
Fast shipping:
Yes
Returns:
365 days to return

Idler Arm Spring

Fast same day shipping
365 days to return any parts

Idler Arm Spring for Whirlpool WED6400SW0 Noisy

$23.38 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP6021532
Fast shipping:
Yes
Returns:
365 days to return

The Idler Arm Spring is an OEM part for Whirlpool dryers, maintains tension in the dryer's belt system. This spring is crucial for the proper operation of the dryer, as it helps to keep the belt tight around the drum and motor pulley, enabling the drum to rotate smoothly during cycles.  

Causes of a bad Idler Arm Spring can include stretching or weakening over time due to constant tension, or breakage from wear and tear.  

Symptoms of a bad Idler Arm Spring include:

  • Unusual noises, such as squeaking or squealing 
  • The dryer drum may not rotate smoothly or may stop turning altogether  
  • Clothes take longer to dry, or you may notice uneven drying 
  • The dryer might not start if the belt is disengaged due to insufficient tension.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.