Whirlpool Dryer WED7000DW0 Won't start or doesn't start

"My Whirlpool WED7000DW0 dryer Won't start"... does not start when the door is closed, not starting or won't turn on - I know, I’ve seen it all before. On this page, I have the instructions and the parts you need to identify and fix the problem. Troubleshooting the "Won't start" problem for your Whirlpool WED7000DW0 dryer shouldn’t be difficult and I’m here to help!

Lets get your WED7000DW0 Dryer fixed

Here are the most common causes for Whirlpool Dryer WED7000DW0 "Won't start"

63% of the time Dryer Thermal Fuse

Dryer wouldn't run

Checked the door switch, start switch, and then the Thermal fuse. All by using the troubleshooting guide on AppliancePartsPros.com website. Found that the thermal fuse was blown. Replaced it and dryer works fine.

No heat from kenmore clothes dryer/no ignition

Followed the step by step process in the video. Cleaned out the dryer exhaust from dryer to the outside. Quickly determined the Dryer Thermal Fuse was blown. Part came in two days. Quick and easy replacement. RUNS FINE ! Lesson Learned...do a COMPLETE Dryer Vent Cleaning 2x yearly !!

Thermal fuse.

Thanks to your video tested the fuse and ordered replaced myself and saved an $80 house call plus more labor to install very pleased with the results Thanks, Cindy

Dryer wouldn't start

After a couple hours of internet searches, I deducted that it had to be one of four parts. However with the parts i needed, if I replaced one , wisdom was to replace all four of them. So I ordered my parts form the dealer except for the Thermal fuse because they were out of stock. I stumbled across AppliancePartsPros.com accidentally. I will say that one the part was very affordable. Secondly, It arrived before the manufacturer's parts I ordered the day before. The repair was very easy and literally took no more than 15 minutes. I would recommend AppliancePartsPros.com to anyone that wants to save themselves the high cost of having a repair person come out. The parts are quality, the shipping is fast, and the website is easy to use.

Clothes dryer was running with no heat

Looked up the most common causes online. Used a multimeter tool to check the circuits and found the thermal fuse was blown. Ordered the part from Appliance parts Pros. It was cheaper and arrived faster than the company who makes the dryer. 5 minute job, will order another fuse to have on hand.

Fast same day shipping
365 days to return any parts

Dryer Thermal Fuse for Whirlpool WED7000DW0 Won't start

$19.64 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP6008325
Fast shipping:
Yes
Returns:
365 days to return

The Thermal Fuse is an OEM replacement part for Whirlpool dryers. This easy-to-install thermal cut-off is designed to shut down your dryer when temperatures become too high, protecting the appliance from overheating. It's a one-time fuse, meaning it cannot be reset and needs to be replaced. It can be tested for continuity with a multimeter.

Causes of Bad Thermal Fuse

  • Excessive lint buildup in the dryer vent
  • Poor air flow causing overheating
  • Failing to clean out the lint filter regularly
  • Faulty heating element or drying cycle thermostat


Don't let a faulty dryer leave you stranded with wet clothes! Replace your dryer's Thermal Fuse to get back to using your dryer worry-free. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

3% of the time Dryer Belt

Broken dryer belt

Replacement belt was very reasonably priced and was shipped super fast! Ordered Sunday and arrived Tuesday afternoon. Repair was very easy. Only required removing two screw on the front dryer plate which then popped right off (Maytag Performa). Dryer drum can be lifted easily to put belt around. Came with a diagram of how to use the tensioner which was helpful. Couldn't actually see what I was doing so had to do it by feel. Was a tight squeeze to get my arm back to the pulley and tensioner but was overall a very simple fix. Dryer works great now.

Dryer drum not turning

Went to your site and viewed it and searched the parts and found he belt. This is my 2nd time using your site and very pleased 100%.

Belt had broken drum was not spinning

Bought a belt and watched the great video on the site that walks you through replacing the belt; worked perfectly, and the dryer is now fixed saving me hundreds!

No heat for the dryer

Just change the thermal fuse, That caused the problem but also changed the other parts to prevent future problems

Dryer drum stopped turning

I ordered a belt from you - which under regular shipping was received in less than 24 hours. With your video & instructions included, the repair was quickly completed. I'm slow - I thought your time estimate was realistic. The additional time was spent cleaning lint. 2 comments on your video: Your video did not say anything about supporting the drum. I did - which seemed to eliminate the need to be concerned about the back drum gasket slipping under a lip.

Fast same day shipping
365 days to return any parts

Dryer Belt for Whirlpool WED7000DW0 Won't start

$17.20 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP2946843
Fast shipping:
Yes
Returns:
365 days to return

The Belt is an OEM replacement part for Whirlpool dryers. It acts as a transmission to power the drum rotation during the drying cycle. The belt reliably conveys motion from the motor to the drum, ensuring garments are properly tumble-dried. 

Symptoms of a bad belt include: 

  • The drum not turning or rotating slowly 
  • Excessive noise and vibration coming from the dryer
  • The belt slipping off the pulley
  • Discoloration, cracking, or fraying of the belt

Causes of a bad belt can be normal wear and tear over time, overloading the dryer with too many wet items, or structural damage to the belt itself. 

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Terminal Block

The power cord melted and needed to replace parts.

I opened the dryer because it wouldn’t start and that’s when I noticed the problem. I went online order the parts I needed. It was easy to replace but was nervous to do it. When I turn on the dryer it worked.

Fast same day shipping
365 days to return any parts

Terminal Block for Whirlpool WED7000DW0 Won't start

$18.92 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP6008354
Fast shipping:
Yes
Returns:
365 days to return

The Terminal Block is an OEM replacement part for Whirlpool dryers. It is responsible for distributing electricity to key components that control drying operations.

Symptoms of a bad terminal block include:

  • The dryer not heating up properly or failing to achieve the desired temperature
  • Components like lights or timers not functioning
  • Strange buzzing or humming noises coming from the dryer

Causes of terminal block failure can be worn or damaged wiring terminals, loose connections due to normal vibration, or corrosion buildup over several years of use.

This terminal block is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore dryer models. 

Please note: Please note that this part does not include the wires, screws, and nuts. They must be ordered separately. For the complete block assembly use 279320.

Dryer Repair Kit (most 29 Inch Large Capacity Models)

Dryer was squeaking very badly!

I disassembled the dryer, cleaned all the lint out(it was everywhere and I'm surprised it had not caught on fire), sprayed lubricant on the idler pulley and the rollers. Then I put everything back together and used the dryer. It was quiet but, short lived. I bought the "Dryer Repair Kit" from AppliancePartsPros. It had a new belt and idler /tension pulley that I may not have needed but, I thought, "if I'm taking it apart again, I'm replacing everything!" I followed the video instructions and the dryer is now like new. The plastic retaining clips (4) for the rollers were much more difficult to remove and replace than shown in the video. Other than that, everything went EZ PZ. My wife came home at the end of the job and helped me by holding the drum in place while installed the front of the dryer. I don't know if I could have done it alone. I know we saved a bunch by doing ourselves AND.....the parts came in less than 24 hours. I could not have scheduled a repairman in that time.

Broken drive belt

Ordered your repair kit based on my model number. It arrived 2 days later, unfortunately it was short 4 nylon and one metal retainers. I called and was apologized to. The CSR quickly found my order and said a new parts kit would go out to me the same day. I was only looking for the missing parts but was politely told that if a customer has an issue she is there to take care of it. REMARKABLE! The new kit arrived in two days with all the parts and the problem is solved. Incredible service in this "to bad for you society". The video of the repair I was performing was very helpful. I'm very pleased.

Not heating

I ordered the heater element in my Whirlpool Estates dryer, watched the video and had it changed in no time. I also replaced the belt assembly. Appliance Parts Pros delivered!

Dryer making noise

Getting the dryer repair did the trick. Now I have a old dryer that sounds like new. A special to the person who took my order, she suggested the kit for me. Plus the parts were less expensive than from another source.

Dryer was making a lot of noise

Drum support rollers - actually the dryer repair kit came complete with the lock washers support wheels pulley and belt.

Fast same day shipping
365 days to return any parts

Dryer Repair Kit (most 29 Inch Large Capacity Models) for Whirlpool WED7000DW0 Won't start

$29.70 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP3131942
Fast shipping:
Yes
Returns:
365 days to return

This dryer repair kit is an OEM replacement part for Whirlpool dryers.

The kit includes:

While some parts in this kit may not fit your specific model, you can use your model number to check for the specific parts you need. This ensures that you have the right parts for your particular dryer and can make the repair process as smooth and straightforward as possible.

Terminal and Wire Kit

Fried terminal block

My daughter moved into a new home. During the move the dryer cord terminal screws somehow went missing and her brother in law substituted regular screws that worked but did not make a secure connection. Eventually after a power outage when power was restored the power surge was more than the substitute screws could handle and it melted some wires. The kit that I ordered made a safe and a properly secured repair. Suzanne took the order and was a tremendous help in getting the correct repair part. Excellent technical and customer support by Suzanne!

Fast same day shipping
365 days to return any parts

Terminal and Wire Kit for Whirlpool WED7000DW0 Won't start

$49.71 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP3133484
Fast shipping:
Yes
Returns:
365 days to return

Includes screws and wire connectors. For the complete terminal block kit use 279320.

Terminal Block Screw Kit

Fast same day shipping
365 days to return any parts

Terminal Block Screw Kit for Whirlpool WED7000DW0 Won't start

$36.18 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP3020386
Fast shipping:
Yes
Returns:
365 days to return

The Terminal Block Screw Kit is an OEM replacement part for Whirlpool dryers. It is an assembly of screws used to securely fasten electrical terminal blocks within the dryer's control panel. Includes 3 screws and 3 nuts. Screw kit for dryer cord connector.

The terminal blocks facilitate safe, orderly connections between various heating elements, sensors, motors, and other internal wiring. The terminal block screws play an important safety role by firmly securing these electrical joints to prevent overheating, shorts, or premature failure.

Symptoms of a faulty terminal block screw kit include:

  • Intermittent power or failure of heating/fan elements to engage  
  • Repeated blowing of internal fuses or tripping of circuit breakers
  • Hot terminal connections detected during operation
  • Arc flashes, sparks, or smoke seen around the control panel area

This genuine Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.