Whirlpool Refrigerator GB2FHDXWQ03 Freezer section too warm

"My Whirlpool GB2FHDXWQ03 refrigerator Freezer section too warm"... freezer section has a high temperature, freezer section increased temperature or freezer section temperature rising - I know, I’ve seen it all before. On this page, I have the instructions and the parts you need to identify and fix the problem. Troubleshooting the "Freezer section too warm" problem for your Whirlpool GB2FHDXWQ03 refrigerator shouldn’t be difficult and I’m here to help!

Lets get your GB2FHDXWQ03 Refrigerator fixed

Here are the most common causes for Whirlpool Refrigerator GB2FHDXWQ03 "Freezer section too warm"

88% of the time Run Capacitor

Freezer & fridge won’t get cold 0

I knew that it could be a anything refrigerant, thermostat & all but thought about how power to the compressor. So I ordered a run capacitor. The chat confirmed that it might be but suggested I get a start relay. I should have listened & saved shipping fee. Replaced both and the compressor started humming as it should, Took me 20 minutes. Thanks guys.

Refrigerator was not cooling.

Thanks to the advice on your website, a new capacitor was ordered and easily installed following your video. Thanks to a less than $40 dollar repair we did not have to spend hundreds to replace the refrigerator! Thank you so much!

Our Whirlpool refrigerator would come on go off and not come on again.

I replaced the capacitor first but still had the same problem. Tried the thermostat second and that fixed the problem. Your repair videos really helped! If I can do this, anyone can. Don't be afraid. Bought repair parts based on your percentage of failures. Thanks again!

Fridge and freezer were not cooling.

Replaced it with the part that was recommended. It was a capacitor. Once I replaced the part and plugged the fridge back into the wall, the fridge kicked on and started working. The fridge got down to the set temperatures. However the fridge cooled for about 18 hours and then stopped working again. I contacted customer service and told them the problem, and they are sending me another part.

Trying to start multiple times before starting. I called a repair person who said there was nothing wrong, but i felt differently

I looked up my model and with the information on troubleshooting, I thought it worth ordering a capacitor. I looked on uTube how to install. My neighbor came over and we took off the panel and replaced the capacitor in 10 minutes!

Fast same day shipping
365 days to return any parts

Run Capacitor for Whirlpool GB2FHDXWQ03 Freezer section too warm

$54.85 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP6023677
Fast shipping:
Yes
Returns:
365 days to return

The Run Capacitor is an OEM part for Whirlpool appliances, designed to provide the necessary electrical charge to start and run the compressor motor. This part attaches to the compressor to aids in maintaining a consistent motor speed and ensuring smooth operation. The run capacitor plays a crucial role in the appliance's electrical system, storing and releasing energy as needed to power the motor.

Causes of a bad Run Capacitor include electrical surges, wear and tear over time, or overheating, which can lead to a failure in providing the necessary start-up energy or maintaining motor speed.

Symptoms of a bad Run Capacitor include:

  • The appliance does not start.
  • The motor shuts off shortly after starting.
  • The appliance is humming but not running.
  • Increased energy consumption.

Replacing a faulty or worn-out run capacitor is essential for restoring the appliance's function and efficiency. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

11% of the time Electronic Control Board

Freezer cold frig warm

Replaced circuit board which solved the problem. Took 15 minutes to figure out how to get to the board and ten minutes to replace it and reinstall everything.

Maytag refrigerator refrigerator to warm

I changed the electronic control panel and the refrigerator is working like new! The part from appliance parts pro got here in less than 24 hours, when using the two day shipping option. The how to video on the appliance parts pro web site was spot on and made it easy to complete the task. I was able to complete the job for less than half the price I was quoted by a Sears tech.

The refrigerator would get warm every couple of weeks when the freezer frosted over

In the end, I replaced the electronic control board. It was an easy fix. Instructions are provided. Just note that you're supposed to crack the board along the fault line to form two boards. The hard part for me was determining that the control board was to blame. I hesitated to replace it because the onboard diagnostics indicated nothing wrong, and replacing it was the most expensive option. The defrost thermostat seemed much more likely, and many instructions on the web (incorrectly) say that the thermostat should close in a cup of ice water. No, the thermostat requires colder temperatures to close; test it in a working freezer. I eventually swapped the control board after seeing a professional tech on YouTube do the same after only seeing the onboard diagnostics pass. And of course the problem only occurred when the freezer frosted over, so every time I'd manually defrost the freezer, everything seemed fine for a couple of weeks. I became very experienced at taking the freezer apart.

Fridge not getting cold but freezer cold and fridge was constantly running

I did some research on the fridge not getting cold but freezer ok. I found a very helpful post that explained how to put the fridge into diagnostic mode and how to run some of the diagnostic tests with the buttons on the fridge display. I determined that the control board was my problem after running several of the self tests. The control board was not allowing the defrost cycle to run properly and it was keeping the compressor on constantly which was freezing the water on the fins and blocking the airflow from the freezer to the fridge.

Refrigerator warm freezer cold.

Google and YouTube search pointed to the problem the fan was ok so I replaced the electronic control board.

Fast same day shipping
365 days to return any parts

Electronic Control Board for Whirlpool GB2FHDXWQ03 Freezer section too warm

$159.56 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP6022400
Fast shipping:
Yes
Returns:
365 days to return

The Electronic Control Board is an OEM replacement part for Whirlpool refrigerators. This Electronic (JAZZ) Control Board manages various functions of your refrigerator, ensuring proper temperature control and operation. After installation, the board will need to be programmed. An instruction sheet is included.

Causes of a bad Electronic Control Board can include electrical surges, which can damage components on the board, age-related wear and tear affecting its functionality, and exposure to moisture or extreme temperature fluctuations. These factors can lead to a malfunctioning fridge with erratic behaviors.

Symptoms of a bad Electronic Control Board include:

  • The refrigerator not cooling properly
  • Irregular defrost cycles leading to frost buildup or thawing issues
  • Unresponsive controls or display issues
  • The ice maker or water dispenser not working as expected

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.