Whirlpool Refrigerator GB2FHDXWS00 Fridge too warm

The Electronic Control Board is an OEM replacement part for Whirlpool refrigerators. This Electronic (JAZZ) Control Board manages various functions of your refrigerator, ensuring proper temperature control and operation. After installation, the board will need to be programmed. An instruction sheet is included.

Causes of a bad Electronic Control Board can include electrical surges, which can damage components on the board, age-related wear and tear affecting its functionality, and exposure to moisture or extreme temperature fluctuations. These factors can lead to a malfunctioning fridge with erratic behaviors.

Symptoms of a bad Electronic Control Board include:

• The refrigerator not cooling properly
• Irregular defrost cycles leading to frost buildup or thawing issues
• Unresponsive controls or display issues
• The ice maker or water dispenser not working as expected

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Run Capacitor is an OEM part for Whirlpool appliances, designed to provide the necessary electrical charge to start and run the compressor motor. This part attaches to the compressor to aids in maintaining a consistent motor speed and ensuring smooth operation. The run capacitor plays a crucial role in the appliance's electrical system, storing and releasing energy as needed to power the motor.

Causes of a bad Run Capacitor include electrical surges, wear and tear over time, or overheating, which can lead to a failure in providing the necessary start-up energy or maintaining motor speed.

Symptoms of a bad Run Capacitor include:

• The appliance does not start.
• The motor shuts off shortly after starting.
• The appliance is humming but not running.
• Increased energy consumption.

Replacing a faulty or worn-out run capacitor is essential for restoring the appliance's function and efficiency. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Thermistor Kit is an OEM part for Whirlpool refrigerators and freezers. This component plays a role in monitoring and controlling the temperature within your appliance. A thermistor is a type of resistor whose resistance changes with temperature changes, allowing the refrigerator's control system to accurately maintain the desired cooling levels based on the readings it provides. 

Causes of a bad thermistor can include wear and tear from constant use, exposure to extreme temperatures that can damage the component, or electrical issues such as short circuits.

Symptoms of a bad Thermistor Kit include:

• The refrigerator or freezer is too cold or not cold enough
• The appliance cycles on and off more frequently or for longer periods than normal
• Unexplained changes in temperature settings

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Frigidaire Evaporator Motor Fan Blade is an OEM replacement part for various Frigidaire brand refrigerators.  An evaporator fan blade in a refrigerator is responsible for circulating the air within the fridge. It helps to ensure that the temperature remains consistent throughout the appliance. The fan blade also helps to keep the evaporator coils from freezing up, which can lead to reduced cooling efficiency.

Causes of a bad fan blade:

• Wear and tear due to age and use.
• Damage from debris buildup

Symptoms of a bad part:

• Loud or unusual noises, such as buzzing, squeaking or humming
• Inconsistent temperatures within the fridge

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This OEM Replacement Part is a defrost thermostat intended for use in Whirlpool refrigerators. It serves as a temperature-sensing device that detects the rise in evaporator temperature during a defrost cycle. This part cycles off the defrost heater once all frost has melted from the coils. Its specifications include a 5-1/4" orange wire, a 25" brown wire, and a 1/2" clip. The defrost thermostat, which comes with a clip on its face, functions as a safety mechanism against overheating.

It is part of the defrost heater assembly that prevents the refrigerator coils from freezing. The component is made of metal and connects to the refrigerator's control board via two wires. This thermostat ensures your refrigerator operates efficiently by maintaining the optimal temperature and preventing frost build-up. This part is compatible with select Whirlpool brand models including Amana, Jenn Air, Kenmore, Kitchen Aid, and Maytag.

The Damper Control Assembly is an OEM part for Whirlpool refrigerators. It is controlled through the thermostat and lets cold air move from the freezer section to the fresh air section of the fridge. The damper control assembly helps maintain the desired temperature and humidity levels in each section, ensuring optimal food preservation.

A faulty damper can be caused by various factors. Over time, continuous use and exposure to temperature changes can lead to wear and tear, resulting in improper airflow or inconsistent temperature control. Mechanical issues, such as a malfunctioning motor, can also contribute to damper assembly problems.

Symptoms of a bad Damper Control Assembly in a Whirlpool refrigerator include uneven cooling between the refrigerator and freezer compartments, improper temperature regulation, or unusual noises coming from the damper assembly. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.