Whirlpool Washer WTW5000DW1 Noisy

"My Whirlpool WTW5000DW1 washer Noisy"... grinding noise, loud noise or scraping noise - I know, I’ve seen it all before. On this page, I have the instructions and the parts you need to identify and fix the problem. Troubleshooting the "Noisy" problem for your Whirlpool WTW5000DW1 washer shouldn’t be difficult and I’m here to help!

Lets get your WTW5000DW1 Washer fixed

Here are the most common causes for Whirlpool Washer WTW5000DW1 "Noisy"

30% of the time Drive Belt

Burning rubber smell during spin / slow or no spin with heavier load

Replaced drive belt - cleaned old spindles and used large grit sandpaper to slightly mar the transmission spindle to provide better traction. Used bicycle tire pry tool to pull off old and put new on.

Motors would run but tub would not spin

I could here the motor running but visually could confirm that the tub was not spinning or moving at all. I removed the back panel of the washer to investigate and found that the drive belt was stretched and worn to the point that it had fallen of the pulleys.I went online to AppliancePartsPros.com and found the item that I needed (new drive belt) and a video showing me the best way to replace it (which I wish I had seen first, it would have saved me time). I will always use this sight first when I have an appliance repair job.

Squeaking noises during the wash cycle.

Your video was a huge help in showing how to quickly change the drive belt. The belt I ordered arrived in no time. I was very impressed with your company. Unfortunately, the noise persisted. So we fixed the problem by buying a new washer.

Grunting noise especially on "rinse"

Replace the belt. The tutorial is ultimate in making all of my washer and dryer repairs! Thank you sooooo much! I look like a professional!

Tub wouldn’t move

Googled the problem. Watched your YouTube video. Said I can do that and I did. Wouldn’t be such a big deal but I’m a 61 year old grandma. If I can do it, so can you.

Fast same day shipping

365 days to return any parts

Drive Belt for Whirlpool WTW5000DW1 Noisy

$36.14 In Stock, Ships Monday

Add to cart

Made by:: Whirlpool
Part Number:: AP6014712
Fast shipping:: Yes
Returns:: 365 days to return

The Drive Belt is an OEM replacement part for your Whirlpool washing machine. This makes it an ideal choice for those looking for a reliable replacement part.

The installation process is straightforward, and with the help of a few simple tools, you can have your washing machine up and running again in no time.

Causes of a bad part include wear and tear, improper installation, or overloading of the washing machine. Symptoms of a bad part include a noisy washing machine or the drum not spinning.

Don't let a faulty drive belt disrupt your laundry routine. Replace it with the Whirlpool Drive Belt and enjoy a smooth and quiet washing experience. Order now and take the first step toward a hassle-free laundry experience.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

25% of the time Drive Clutch Kit

Splutch cam was stripped

I watched the video on HOW TO REPLACE SPLUTCH.CAM KIT. Then I ordered the Kit, it was delivered the very next day. Replacing the kit took me 20 minutes. EASY AS PIE !!!

My maytag centennial washer was making a ratcheting noise right after initial water fill up and going into wash/agitate mode

After putting in my washer model number a number of previous customer Q&A also came up with the available parts. After perusing the Q&A, I was able to diagnose my problem (needed a new split assembly). I watched the DIY video that was connected with the part pop-up and was able to perform the repair myself in less than an hour. Thanks APP!

Whirlpool Cabrio gear case.

Took it apart which took awhile the inner tub had to be removed which was a job in itself. once that was done I tipped it on its side and removed the gear case. also replaced the splutch cam while I was at it. To take it apart took me about 3hrs everything was rusted together to put it back together took me about an hour. works great.

Grinding type noise when agitating and during spin cycle

Replaced splutch cam kit in 15 minutes and no more sound. Received the part in less than 24 hours with the least expensive shipping choice.

Loud noise from gears during rinse cycle

Replaced Splutch Cam Kit .The gears did not looked stripped but the spring was weak not keeping them engaged. I think over time they would have worn more. The video was very helpful for part location and knowing what to remove for easy replacement.

Fast same day shipping

365 days to return any parts

Drive Clutch Kit for Whirlpool WTW5000DW1 Noisy

$54.39 In Stock, Ships Monday

Add to cart

Made by:: Whirlpool
Part Number:: AP5951296
Fast shipping:: Yes
Returns:: 365 days to return

The Drive Clutch Kit is an OEM replacement part for Whirlpool washing machines. As an integral transmission component, it includes the clutch that engages the drive motor to rotate the central agitator or impeller.

Included in kit:

Spring
Housing
Cam ring
Basket drive gear
Pulley
Nut

Causes of a bad clutch kit include worn parts that have aged from repeated use. Signs include slipping, grinding, or clicking noises from the transmission area.

Symptoms of a faulty clutch kit are:

The washer tub failing to turn or agitate clothes during wash cycles
Delayed starts or intermittent rotation
Vibration or shaking sensed from the frontloader or toploader

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.