Whirlpool Dryer WED7800XW0 Won't start or doesn't start

The Thermal Fuse is an OEM replacement part for Whirlpool dryers. This disposable, one-time fuse ensures safe operation of your appliance by cutting off power if the temperature exceeds safe limits.

A bad thermal fuse can cause your appliance to stop functioning or prevent it from turning on altogether. Symptoms of a bad thermal fuse include no heat or a dryer that won't start.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Door Catch is an OEM part for Whirlpool dryers designed to securely hold the dryer door closed during use. This small part ensures that the door latch engages properly, providing a tight seal to prevent heat from escaping and ensuring the dryer operates safely and efficiently. Made from durable materials, the door catch is engineered to withstand the frequent opening and closing of the dryer door.

Symptoms of a bad Dryer Door Catch include:

• The dryer door not staying shut  
• Difficulty in closing the door 
• The dryer failing to start due  

Causes of failure can include normal wear and tear from the constant use of the dryer, damage from an external force, or misalignment from the door being improperly closed or hit. Over time, these factors can lead to the weakening or breaking of the door catch.

Replacing a faulty or worn-out Dryer Door Catch ensures the door remains closed as required during use, preventing potential hazards. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This catch is the female piece on the door. For the strike on the front panel that inserts into the catch order W10295405.

Includes screws and wire connectors. For the complete terminal block kit use 279320.

The Terminal Block Screw Kit is an OEM replacement part for Whirlpool dryers. It is an assembly of screws used to securely fasten electrical terminal blocks within the dryer's control panel. Includes 3 screws and 3 nuts. Screw kit for dryer cord connector.

The terminal blocks facilitate safe, orderly connections between various heating elements, sensors, motors, and other internal wiring. The terminal block screws play an important safety role by firmly securing these electrical joints to prevent overheating, shorts, or premature failure.

Symptoms of a faulty terminal block screw kit include:

• Intermittent power or failure of heating/fan elements to engage  
• Repeated blowing of internal fuses or tripping of circuit breakers
• Hot terminal connections detected during operation
• Arc flashes, sparks, or smoke seen around the control panel area

This genuine Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

The Dryer Repair Kit is an OEM replacement part for Whirlpool dryers, designed to address common wear and repair issues. This kit ensures that the drum rotates freely and quietly. 

Symptoms of a dryer in need of this repair kit include:

• Unusual noises, such as squeaking or thumping 
• The dryer drum not turning smoothly or at all 
• Extended drying times 

Causes of these issues can range from normal wear and tear, which gradually degrades the rollers, belt, and pulley, to overloading the dryer, which can accelerate the wear on these components and lead to premature failure. Regular maintenance and timely replacement of these parts can prevent more serious problems and extend the life of the dryer.

What's Included:

• Drum belt 661570V
• 4 drum support rollers WPW10314173
• Idler pulley 279640
• Tri rings WPW10512946
• Washer WP233520
• Instruction sheet

Please note: Some parts in this kit may not fit your specific model. Use your model number to check for your specific parts.