Whirlpool Laundry Center WED7300DW1 Will not tumble or doesn't tumble

This dryer repair kit is an OEM replacement part for Whirlpool dryers.

The kit includes:

• One Dryer belt (341241)
• Drum support roller kit (349241T)
• One idler pulley (WP691366)
• Instructions.

While some parts in this kit may not fit your specific model, you can use your model number to check for the specific parts you need. This ensures that you have the right parts for your particular dryer and can make the repair process as smooth and straightforward as possible.

The Idler Pulley is an OEM part for Whirlpool dryers, responsible for maintaining the correct tension on the drive belt, allowing it to remain tight and aligned, preventing slipping and contributing to the consistent rotation of the drum during cycles.  

Symptoms of a bad Idler Pulley include:

• Squealing or squeaking noises  
• The dryer drum failing to turn 
• Excessive vibration or unusual sounds 

Causes of failure can range from normal wear and tear, which can lead to the pulley's bearing wearing out, to the accumulation of lint and debris causing the pulley to seize or function improperly. Additionally, a cracked or damaged pulley can lead to belt misalignment and slippage.

Replacing a faulty or worn-out Idler Pulley prevents damage to the dryer's motor and drum and also ensures your clothes are dried efficiently. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Fits all Whirlpool-made dryers (Whirlpool, Kenmore with prefix 110, Roper, KitchenAid, and Estate). Matching belt 341241 and rear support rollers 349241T. Whirlpool dryer repair manual 677818L.

The Dryer Repair Kit is an OEM replacement part for Whirlpool dryers, designed to address common wear and repair issues. This kit ensures that the drum rotates freely and quietly. 

Symptoms of a dryer in need of this repair kit include:

• Unusual noises, such as squeaking or thumping 
• The dryer drum not turning smoothly or at all 
• Extended drying times 

Causes of these issues can range from normal wear and tear, which gradually degrades the rollers, belt, and pulley, to overloading the dryer, which can accelerate the wear on these components and lead to premature failure. Regular maintenance and timely replacement of these parts can prevent more serious problems and extend the life of the dryer.

What's Included:

• Drum belt 661570V
• 4 drum support rollers WPW10314173
• Idler pulley 279640
• Tri rings WPW10512946
• Washer WP233520
• Instruction sheet

Please note: Some parts in this kit may not fit your specific model. Use your model number to check for your specific parts.

The Thermal Fuse is an OEM replacement part for Whirlpool dryers. This easy-to-install thermal cut-off is designed to shut down your dryer when temperatures become too high, protecting the appliance from overheating. It's a one-time fuse, meaning it cannot be reset and needs to be replaced. It can be tested for continuity with a multimeter.

Causes of Bad Thermal Fuse

• Excessive lint buildup in the dryer vent
• Poor air flow causing overheating
• Failing to clean out the lint filter regularly
• Faulty heating element or drying cycle thermostat

Don't let a faulty dryer leave you stranded with wet clothes! Replace your dryer's Thermal Fuse to get back to using your dryer worry-free. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Whirlpool Rear Drum Support Roller Kit is an OEM replacement part designed to keep your dryer running smoothly. This kit is for anyone experiencing issues with a noisy dryer.

Featuring two drum support rollers, four tri-rings, and one retaining washer, this kit is designed to provide long-lasting support and reduce noise and vibrations. Made with durable materials, these rollers ensure a stable and smooth drum rotation. Matching belt 341241 and idler pulley WP691366.

Causes of a bad part: 

• Worn-out, damaged or broken drum support rollers 
• Worn tri-rings 
• Damaged retaining washer

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Bearing Ring for Front Support is an OEM part for Whirlpool dryers. It provides support and stability to the dryer's front drum. The bearing ring helps to reduce friction and ensure smooth rotation of the drum during the drying cycle. It helps to maintain proper alignment and balance, preventing excessive noise and vibration during operation.

A bad bearing ring can occur due to wear and tear over time, high usage, or damage from foreign objects getting caught in the drum. If the bearing ring becomes worn, cracked, or damaged, it can lead to loud squeaking or grinding noises coming from the dryer.

Symptoms of a bad bearing ring for front support include:

• Loud squeaking or grinding noises during operation.
• Excessive vibration or shaking of the dryer.
• Difficulty in rotating the drum manually.
• Visible damage or wear on the bearing ring.

If you're experiencing any of these issues, it's time to replace the bearing ring for front support with this genuine Whirlpool part. Restore the smooth and quiet operation of your dryer's drum with a new bearing ring. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Motor Pulley is an OEM part for Whirlpool dryers, connects the dryer motor to the drum belt, enabling the drum to turn and efficiently dry your clothes. This pulley is crucial for the smooth operation of the dryer, ensuring that the belt is tensioned correctly and runs smoothly without slipping or causing wear.  

Causes of a bad Motor Pulley include wear and tear from regular use, a buildup of lint and debris that can interfere with its operation, or a malfunctioning dryer motor that puts undue stress on the pulley.

Symptoms of a bad Motor Pulley include:

• Unusual noises coming from the dryer, such as squeaking or grinding
• The dryer drum failing to turn even though the motor is running
• The dryer taking longer than normal to dry clothes, which can occur if the pulley is not providing proper tension to the belt

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The OEM Replacement Part is a Blower Wheel, designed for use in specific Whirlpool Dryer models. This 8 5/8" diameter wheel, is crafted to move air through the appliance effectively, utilizing a squirrel cage design. Its main function is to blow air through the dryer drum and out the exhaust, a crucial element in the drying process.

The blower wheel attaches to the motor shaft using left-handed threads and can be removed by unscrewing it clockwise off the motor shaft. It is particularly suitable for 29-inch models with a lint filter on top. This part is compatible with select Whirlpool brand models including Kenmore, and Roper.

The Drum Support Wheel Retainer is an OEM part for Whirlpool dryers. This part secures the drum support wheels in place, ensuring that the dryer drum rotates smoothly and quietly during operation. The retainer is designed to fit precisely, preventing the support wheels from loosening or wobbling, which can lead to inefficient drying and increased wear on other components. 

Over time, retainers can wear out or become damaged, potentially leading to a loose drum support wheel. This can cause the dryer to operate noisily, vibrate excessively, or even damage the drum itself if not addressed promptly.

Symptoms of a bad Drum Support Wheel Retainer include:

• Unusual noises, such as squeaking or thumping, coming from the dryer
• Excessive vibration during operation
• The dryer drum may feel unstable or wobble when turned by hand

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Thermistor is an OEM part for Whirlpool brand dryers. It is a temperature-sensing resistor that monitors air temperature changes during the drying cycle. The thermistor provides feedback to the control board on heating element performance and internal air condition. 

Symptoms of a failed thermistor include:

• Inaccurate temperature readings and selections  
• Improper or incomplete drying
• Safety issues from overheating due to lack of feedback
• Error codes displayed on the control panel

Causes can be related to normal wear and environmental exposure over time. Failure prevents the dryer from achieving optimal drying conditions.

This genuine Whirlpool thermistor replacement restores precise air temperature monitoring. It ensures the control board receives accurate input to effectively regulate heating levels. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.