Whirlpool Refrigerator GB2FHDXWB00 Not dispensing water

"My Whirlpool GB2FHDXWB00 refrigerator Not dispensing water"... door does not dispense water, water dispenser not working or won't dispense water through the door - I know, I’ve seen it all before. On this page, I have the instructions and the parts you need to identify and fix the problem. Troubleshooting the "Not dispensing water" problem for your Whirlpool GB2FHDXWB00 refrigerator shouldn’t be difficult and I’m here to help!

Lets get your GB2FHDXWB00 Refrigerator fixed

Here are the most common causes for Whirlpool Refrigerator GB2FHDXWB00 "Not dispensing water"

52% of the time Water Inlet Valve

I didn't raise the ice cube detection arm to the no water position when i went on vacation

I replaced the solenoid.The part was an exact fit and took longer to get the tools than to replace the part. It works great!

Ice maker over flowing

New solenoid for water control to ice maker. I had a good idea that was the problem but the trouble shooting guide confirmed the problem Thanks for the great help.

No ice in icemaker

I replaced the water inlet valve. I found the video on your site to be essential since my old refrigerator had threaded connectors and the new valve had a (new to me) push-in connector.

Ice make stopped making ice

The ice maker would make ice if I manually filled it; the ejector teeth would turn the ice cubes into the bin, but then the ice maker wouldn't refill with water to start the cycle over again. I ordered a replacement water inlet valve from appliancepartspros.com and followed the straightforward steps in the video to replace the inlet valve in about 15 minutes. As soon as I plugged the refrigerator back in and set the sensor arm on the ice maker down, the tray filled. The ice maker has been working ever since. The cost for a service visit to do this repair was quoted to me at $129, not including parts and labor. The valve cost around $55 plus shipping.

Bad intake valve for ice machine broken. Missing pantry door.

Ordered new parts and pamtry door. Came quickly and easy to replace. Ice maching stopped working. I trouble shooted it down to the intake valve. Again, came quick and easy to replace.

Fast same day shipping

365 days to return any parts

Water Inlet Valve for Whirlpool GB2FHDXWB00 Not dispensing water

$51.71 In Stock, Ships Monday

Add to cart

Made by:: Whirlpool
Part Number:: AP6007253
Fast shipping:: Yes
Returns:: 365 days to return

This OEM Replacement Part is a single coil water inlet valve intended for use in refrigerators. The valve serves as a solenoid-operated switch that controls the release of water from the supply line into the ice maker mold when activated. This part is crucial to the proper functioning of the refrigerator's ice-making and water dispensing systems.

If your ice maker is producing small or hollow cubes, failing to dispense ice or water, or if your refrigerator is leaking, this could indicate a restriction in the water inlet valve necessitating its replacement. The valve comes with instructions for installation, and the necessary tools for this repair include a 1/4-inch nut driver and a utility knife. Always remember to unplug your refrigerator from the power source as a safety measure before commencing the repair. Please refer to the manufacturer's diagram for further instructions