Whirlpool Dryer WED5840SW0 Noisy

"My Whirlpool WED5840SW0 dryer Noisy"... humming noise, rattling or screeching - I know, I’ve seen it all before. On this page, I have the instructions and the parts you need to identify and fix the problem. Troubleshooting the "Noisy" problem for your Whirlpool WED5840SW0 dryer shouldn’t be difficult and I’m here to help!

Lets get your WED5840SW0 Dryer fixed

Here are the most common causes for Whirlpool Dryer WED5840SW0 "Noisy"

30% of the time Rear Drum Support Roller Kit

Dryer was making a lot of noise when turned on annoying thump thump thump.

I searched online and got to appliancepartspros.com I read some of the problems they had and determined that it was a roller problem. I watched the video on how to fix it, so I opened it up, took it apart and found the bad roller. The video was right on. I immediately ordered the parts I needed and it came in the mail the next day. Amazing!!!! I re-watched the video and put in the new rollers and put the dryer back together. Plugged it in, turned it on and it worked like a charm. No more noise. The only problem I had was the shipping cost almost as the part. The part was cheaper than other sites and it did ship in one day. So I am happy on the outcome despite the outrageous shipping.

Barrel rollers was worn and making noise

Was able to remove the old ones place the newly purchased ones install and it was working wonderfully thank you for price quality and ease of purchasing and delivering

Bad rollers

Watched your youtube video on your site and replaced items without any problems. I got your shipment fast, and the video was VERY HELPFUL. Good Job ApplianceParts !!!!!

Loud dryer

I watched a video provided by AppliancePartsPros.com which instructed me on how to diagnose the problem. I ordered the parts which came with in 24 hours (I used the standard shipping). I put the new rollers in dryer, it is so quiet I can watch TV in the next room. Thanks.

Dryer was making a thudding noise after disassembling it noticed one of the two drum rollers was worn out

I ordered a new roller assembly which came with two rollers, four retainers, and a fastener clip and I replaced all old equipment. Shipment arrived in two days and repair was easy.

Fast same day shipping
365 days to return any parts

Rear Drum Support Roller Kit for Whirlpool WED5840SW0 Noisy

$14.38 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP3098345
Fast shipping:
Yes
Returns:
365 days to return

The Whirlpool Rear Drum Support Roller Kit is an OEM replacement part designed to keep your dryer running smoothly. Compatible with a range of Whirlpool and Kenmore dryer models, this kit is for anyone experiencing issues with a noisy dryer.

Featuring two drum support rollers, four tri-rings, and one retaining washer, this kit is designed to provide long-lasting support and reduce noise and vibrations. Made with durable materials, these rollers ensure a stable and smooth drum rotation. Matching belt 341241 and idler pulley WP691366.


Causes of a bad part: 

  • Worn-out, damaged or broken drum support rollers 
  • Worn tri-rings 
  • Damaged retaining washer

Don't let a bad support roller cause unnecessary damage to your dryer. Order the Whirlpool Rear Drum Support Roller Kit today and enjoy a dryer that runs smoothly and efficiently. With this kit, you can replace the parts and resolve the problem in no time.

22% of the time Dryer Repair Kit (most 29 Inch Large Capacity Models)

Dryer was squeaking very badly!

I disassembled the dryer, cleaned all the lint out(it was everywhere and I'm surprised it had not caught on fire), sprayed lubricant on the idler pulley and the rollers. Then I put everything back together and used the dryer. It was quiet but, short lived. I bought the "Dryer Repair Kit" from AppliancePartsPros. It had a new belt and idler /tension pulley that I may not have needed but, I thought, "if I'm taking it apart again, I'm replacing everything!" I followed the video instructions and the dryer is now like new. The plastic retaining clips (4) for the rollers were much more difficult to remove and replace than shown in the video. Other than that, everything went EZ PZ. My wife came home at the end of the job and helped me by holding the drum in place while installed the front of the dryer. I don't know if I could have done it alone. I know we saved a bunch by doing ourselves AND.....the parts came in less than 24 hours. I could not have scheduled a repairman in that time.

Broken drive belt

Ordered your repair kit based on my model number. It arrived 2 days later, unfortunately it was short 4 nylon and one metal retainers. I called and was apologized to. The CSR quickly found my order and said a new parts kit would go out to me the same day. I was only looking for the missing parts but was politely told that if a customer has an issue she is there to take care of it. REMARKABLE! The new kit arrived in two days with all the parts and the problem is solved. Incredible service in this "to bad for you society". The video of the repair I was performing was very helpful. I'm very pleased.

Not heating

I ordered the heater element in my Whirlpool Estates dryer, watched the video and had it changed in no time. I also replaced the belt assembly. Appliance Parts Pros delivered!

Dryer making noise

Getting the dryer repair did the trick. Now I have a old dryer that sounds like new. A special to the person who took my order, she suggested the kit for me. Plus the parts were less expensive than from another source.

Dryer was making a lot of noise

Drum support rollers - actually the dryer repair kit came complete with the lock washers support wheels pulley and belt.

Fast same day shipping
365 days to return any parts

Dryer Repair Kit (most 29 Inch Large Capacity Models) for Whirlpool WED5840SW0 Noisy

$21.52 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP3131942
Fast shipping:
Yes
Returns:
365 days to return

Looking for a reliable and high-quality OEM replacement part to repair your 29-inch large-capacity dryer? Look no further than the  Dryer repair kit. Sourced directly from Whirlpool.

The kit includes:

While some parts in this kit may not fit your specific model, you can use your model number to check for the specific parts you need. This ensures that you have the right parts for your particular dryer and can make the repair process as smooth and straightforward as possible.

17% of the time Dryer Belt

Broken dryer belt

Replacement belt was very reasonably priced and was shipped super fast! Ordered Sunday and arrived Tuesday afternoon. Repair was very easy. Only required removing two screw on the front dryer plate which then popped right off (Maytag Performa). Dryer drum can be lifted easily to put belt around. Came with a diagram of how to use the tensioner which was helpful. Couldn't actually see what I was doing so had to do it by feel. Was a tight squeeze to get my arm back to the pulley and tensioner but was overall a very simple fix. Dryer works great now.

Dryer drum not turning

Went to your site and viewed it and searched the parts and found he belt. This is my 2nd time using your site and very pleased 100%.

Belt had broken drum was not spinning

Bought a belt and watched the great video on the site that walks you through replacing the belt; worked perfectly, and the dryer is now fixed saving me hundreds!

No heat for the dryer

Just change the thermal fuse, That caused the problem but also changed the other parts to prevent future problems

Dryer drum stopped turning

I ordered a belt from you - which under regular shipping was received in less than 24 hours. With your video & instructions included, the repair was quickly completed. I'm slow - I thought your time estimate was realistic. The additional time was spent cleaning lint. 2 comments on your video: Your video did not say anything about supporting the drum. I did - which seemed to eliminate the need to be concerned about the back drum gasket slipping under a lip.

Fast same day shipping
365 days to return any parts

Dryer Belt for Whirlpool WED5840SW0 Noisy

$13.79 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP2946843
Fast shipping:
Yes
Returns:
365 days to return

The Belt is an OEM part compatible with Whirlpool dryers. It acts as a transmission to power the drum rotation during the drying cycle. The belt reliably conveys motion from the motor to the drum, ensuring garments are properly tumble-dried. 

Symptoms of a bad belt include: 

  • The drum not turning or rotating slowly 
  • Excessive noise and vibration coming from the dryer
  • The belt slipping off the pulley
  • Discoloration, cracking, or fraying of the belt

Causes of a bad belt can be normal wear and tear over time, overloading the dryer with too many wet items, or structural damage to the belt itself. 

This genuine OEM Whirlpool part is compatible with many other brand dryers including Maytag, KitchenAid, Affresh, Roper, and some Kenmore models for dependable performance.

7% of the time Idler Pulley

Dryer was squeaking during operation.

I purchased a dryer rebuild kit and an idler pully as the pully in the rebuild kit was not the same type as in my dryer.

Squeaking while running

I replaced the idler pulley wheel assembly, and it works fine now. I had purchased a repair kit from another supplier, but the idler pulley assembly was too tight on the belt. --Yes, I assembled it correctly-- The drum wouldn't turn. I sent away for this idler pulley which replaced the original assembly. The drum turns, and the squeaking is eliminated..

Dryer was missing idler pulley.

I was able to find the Idler pulley here on AppliancePartsPros.com, for my dryer. Install took literally 5 minutes and dryer works as it should.

Dryer made a loud squeaking noise when you turned it on

I googled the problem and narrowed it down to drum support which are the wheels it sits on and idler pulley which puts tension on the belt. The bearings had gone out on it

Broken dryer belt.

Looked on internet for parts, but the general model number corresponded to many different belts and I could not figure it out. Your phone person taught me how to find the exact model number on the door of the dryer and identified the proper belt. In addition, research showed that the friction based idler pulley on my model was the cause of failure, so I got the replacement idler pulley from you using the correct model number. There were a couple of videos, especially FixIt, that showed all the steps to fix it. Actual time working on the dryer was less than an hour. The videos were awesome.

Fast same day shipping
365 days to return any parts

Idler Pulley for Whirlpool WED5840SW0 Noisy

$17.65 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP6010582
Fast shipping:
Yes
Returns:
365 days to return

The Idler Pulley is an OEM replacement part compatible with Whirlpool brand appliances. The idler pulley assembly maintains proper tension on the drive belt by keeping the belt tensioned correctly.

Fits all Whirlpool-made dryers (Whirlpool, Kenmore with prefix 110, Roper, KitchenAid, and Estate). Matching belt 341241 and rear support rollers 349241T. Whirlpool dryer repair manual 677818L.

4% of the time Dryer Drive Motor

Motor was humming and not running

However, it would run if I gave the motor shaft a spin. Suspected either a starting relay or capacitor. Soon leaned that it integral part of the motor. So I had to replace the motor which fixed the issue.

My whirlpool dryer motor died

I looked at your repair video and ordered the replacement part. The motor arrived quickly and I replaced the motor. Unfortunately the fan broke while removing the old one (this I understood sometimes happens) but was easily replaced as well. I was so proud of my work and the wife was so proud of me. By ordering the parts and doing the work myself I saved hundreds of dollars by not having to buy a new dryer. Repair was also so much better for the environment without having to throw away the old dryer! I am not a repairman and don't have much handy experience but the video made the repair a snap!

Bad dryer moter

Disassembled dryer to get down to the motor. Had to chisel blower wheel off motor. Picked up wheel locally and assembled back together again.

Dryer drive motor

First dryer stopped working. When I went to restart there was a humming noise. I unloaded the dryer. Turned on the dryer and it made a humming noise again but it worked. When I put a load in the dryer it made a humming noise and wouldn't start. I ordered a Dryer motor from AppliancePartsPros.com. I paid for next day delivery. I went back to the website and it has a video showing how to install it. It took about twenty minutes to install the new motor and it worked great! I have used AppliancePartsPros.com also to fix my washer in the past. My appliances are over 21yrs old and work great! Thanks to AppliancePartsPros.com. This last repair cost me $128.00 including next day delivery, instead of a $1,000 dollars for a new dryer. Great Service.

Electric dryer making loud noise and would stop running after only a few minutes.

I replaced the dryer motor and blower fan. The blower fan had to be chiseled off the dryer motor shaft. Would suggest anyone replacing the dryer motor on an older dryer to order a blower fan ($20) with the motor just in case it won't screw off the motor shaft. If you don't need the blower fan simply return it for a refund.

Fast same day shipping
365 days to return any parts

Dryer Drive Motor for Whirlpool WED5840SW0 Noisy

$72.11 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP3094245
Fast shipping:
Yes
Returns:
365 days to return

The Dryer Drive Motor is an OEM replacement part compatible with Whirlpool dryers. This high-quality motor features a durable construction and provides reliable performance, ensuring your dryer runs smoothly.

Recommended related items:

  • Belt 341241
  • Idler pulley WP691366
  • Drum rollers 349241T

Causes of a bad part:

  • Overheating
  • Wear and tear
  • Electrical failures

Symptoms of a bad part:

  • Dryer drum not turning
  • Unusual noise
  • Burning smell

This OEM replacement motor is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

2% of the time Bearing Ring for Front Support

Bearing ring broke in half.

Replaced the Bearing Ring. It was easier than I thought. Thanks to YouTube the repair video took less than 2 minutes. Now the noise is gone.

Electric clothes dryer front bearing ring

Your video was very helpful. It only took a few minutes to install the bearing. Although, my dryer is a Kenmore, it is essentially the same as a Whirlpool.

My dryer was making unholy noises screeching and growling at start up thumbing and bumping during the dry cycle.

I went to my old standby at AppliancePartsPros.com for answers. Immediately finding the screeching noise was the idler. I ordered a new belt and idler and drum wheels. The order was placed and the parts arrived magically the next day... NO KIDDING the next day. I digress, upon the parts arrival I discovered I had neglected the purchase of the front Bearing Ring for Front Support and called my buddies at APP. They took my order for the bearing ring and again like magic, the part arrived at my door. I followed the video instructions and within 45 minutes, my dryer was up and running as if it had undergone an exorcism. No more howling, thumping, bumping, and unholy screeching. Thank you AppliancePartsPros.com You just saved me about $300.00 buck.

Fast same day shipping
365 days to return any parts

Bearing Ring for Front Support for Whirlpool WED5840SW0 Noisy

$42.85 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP2996731
Fast shipping:
Yes
Returns:
365 days to return

Made by Whirlpool. Fits most Whirlpool, Kenmore, and Roper dryers.

2% of the time Felt Drum Seal

Heating element and drum seal

The parts I ordered came quick, the videos were a huge help, parts were fairly priced Great place to order parts from, I'll definitely be coming back to them.

Loosing heat and noisy.

We followed the repair video. We probably couldn't have done it without the video but it was an easy quick repair. We were sorry we hadn't replaced the felt sooner.

Warm air leak so rear felt drum seal needed to be replaced

My son in law and I replaced the seal in about 30 minutes. It would be difficult for one person to do alone, but it was easy with two..

The felt drum seal came off.

Ordered a new one, which came the next day....couldn't believe it..was so happy, put it on and working fine....thank you so very much.

Felt drum seal needed to be replaced.

I try to follow your instructions on the Internet. big problem trying to keep the new seal on drum without the glue with clothes pins. Every time I got to end of seal on drum, it would pop off. Finally, just did a little section at a time, and it worked out.

Fast same day shipping
365 days to return any parts

Felt Drum Seal for Whirlpool WED5840SW0 Noisy

$48.06 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP5737110
Fast shipping:
Yes
Returns:
365 days to return

The Whirlpool Felt Drum Seal is an OEM replacement part that is compatible with select Whirlpool, Maytag, and Kenmore dryers. The felt drum seal helps prevent clothes from getting caught between the drum and the dryer's interior. Its high-quality construction ensures durability and long-lasting performance. The Felt Drum Seal comes with the necessary adhesive for installation.

Symptoms of a bad felt drum seal include increased noise during operation, clothes getting stuck in the dryer, and decreased drying performance. Common causes of a bad felt drum seal include wear and tear over time, frequent overloading of the dryer, and exposure to high temperatures.

2% of the time Blower Wheel

Dryer fan blower wheel broke loose from motor shaft making loud noise and preventing the dryer from drying properly

Replaced the fan. It required the complete dismantling of the dryer, but it wasn't difficult and the repair went well. (Watched a video on You Tube). But it took a little too long to get the part (8 days).

Fan broke on dryer.

Took the entire dryer apart and watched a video on how to do it.. Took us about 25 mins and the dryer works like new. So happy!!!!

The blower wheel was broken

I watched a repair video on how to replace the wheel. There was a link provided to order the replacement part. It was shipped and arrived in 3 days.

Growling and overheating motor.

First I had to replace the motor, however, as an ex professional Repair Technician, I happen to know that quite often, it is very difficult (if not impossible) to get the blower wheel off of the motor shaft. Especially since the models that use these blower wheels are quite old now (still good though). When this happens, the blower wheel must be chiseled apart to get the motor out. That said, I had to do this and after replacing the motor, it is very easy to spin the new blower wheel on to the motor. I would suggest to anyone changing the motor, to order the blower wheel as well since you may likely need it and won't have your dryer inoperative while ordering more parts.

Broken blower fan in maytag dryer

Used APP to id part. Ordered. Came fedx next morning. Me and youtube installed the fan. My kitchen laundry is back up and running! I am just an average guy so getting the right part so quickly made the repair go smoothly!

Fast same day shipping
365 days to return any parts

Blower Wheel for Whirlpool WED5840SW0 Noisy

$27.48 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP6010602
Fast shipping:
Yes
Returns:
365 days to return

The OEM Replacement Part is a Blower Wheel, designed for use in specific Whirlpool Dryer models. This 8 5/8" diameter wheel, is crafted to move air through the appliance effectively, utilizing a squirrel cage design. Its main function is to blow air through the dryer drum and out the exhaust, a crucial element in the drying process.

The blower wheel attaches to the motor shaft using left-handed threads and can be removed by unscrewing it clockwise off the motor shaft. It is particularly suitable for 29-inch models with a lint filter on top. This part is compatible with select Whirlpool brand models including Kenmore, and Roper.

2% of the time Left Drum Roller Shaft

Fast same day shipping
365 days to return any parts

Left Drum Roller Shaft for Whirlpool WED5840SW0 Noisy

$41.03 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP6020387
Fast shipping:
Yes
Returns:
365 days to return

The Whirlpool Left Drum Roller Shaft is an OEM replacement part compatible with Whirlpool brand dryers. It ensures smooth and efficient drum rotation, reducing noise and preventing wear and tear. It is made from high-quality materials, guaranteeing durability and long-lasting performance. With the Whirlpool Left Drum Roller Shaft, you can restore your dryer's performance and eliminate annoying noises.

Causes of a bad part:

  • Regular wear and tear over time
  • Heavy loads or overloading the dryer
  • Lack of proper maintenance

Symptoms of a bad part:

  • Unusual or loud noises during dryer operation
  • Uneven or erratic drum rotation
  • Excessive vibrations or shaking

less than 1% of the time Drum Support Roller Shaft-Right

Dryer was making a lot of noise like shoes were trashing around in it.

I found your video and was able to determine that the rollers were junk. Took the machine apart and ordered the replacement rollers, belt and shaft. Put everything back together and it worked great.

Fast same day shipping
365 days to return any parts

Drum Support Roller Shaft-Right for Whirlpool WED5840SW0 Noisy

$45.76 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP6020386
Fast shipping:
Yes
Returns:
365 days to return

The Drum Support Roller Shaft is an OEM Replacement Part designed by Whirlpool for select dryer models. This part is specifically meant for the right-side drum support roller. The shaft measures 3-3/16 inches long and does not need a washer or a nut for installation. It affixes to the support roller, which enables the drum of the dryer to rotate effectively. A malfunctioning or broken shaft can impede the drum's rotation. This can manifest as excessive noise or vibration during dryer operation.

This OEM Replacement Part ensures a smooth, quiet, and efficient dryer performance. However, safety precautions, including disconnecting the power source and wearing protective gloves, are crucial during installation. Referencing the manufacturer's owner manual for installation instructions is recommended. It is compatible with various dryer models, including those manufactured by Kenmore, Whirlpool, Jenn-Air, and Maytag.

Lint Screen Housing Foam Seal

Fast same day shipping
365 days to return any parts

Lint Screen Housing Foam Seal for Whirlpool WED5840SW0 Noisy

$7.10 In Stock, Ships Today
Add to cart
Made by:
Whirlpool
Part Number:
AP6008371
Fast shipping:
Yes
Returns:
365 days to return

The Lint Screen Housing Foam Seal is an OEM replacement part that is compatible with Whirlpool dryers. It fits around the lint screen and is placed inside the lint filter housing. This ensures the heated air funneled into the dryer drum is free from lint, debris, and moisture.

When this seal fails, it can cause various problems with the dryer's operation. You may notice the buildup of lint inside the dryer vent, which can increase the risk of a fire. The failing seal can also cause the clothes to come out of the dryer wet or damp. Additionally, the clothes may take longer to dry than usual.

Factors that cause a lint screen housing seal to fail include:

  • Frequent overloading of the dryer
  • Natural wear and tear
  • Exposure to high temperatures and humidity

If your dryer's lint screen housing seal starts to fail, it's best to replace it right away.