Whirlpool Dryer WED5840SW0 Shuts off too soon

"My Whirlpool WED5840SW0 dryer Shuts off too soon"... runs for a few minutes then quits, shuts off mid cycle or shuts off too early - I know, I’ve seen it all before. On this page, I have the instructions and the parts you need to identify and fix the problem. Troubleshooting the "Shuts off too soon" problem for your Whirlpool WED5840SW0 dryer shouldn’t be difficult and I’m here to help!

Lets get your WED5840SW0 Dryer fixed

Here are the most common causes for Whirlpool Dryer WED5840SW0 "Shuts off too soon"

32% of the time Door Latch Kit

Clothes dryer door latch failed.

I ordered the Latch Kit. It arrived within 2 days. I replaced the Latch and Striker within 5 minutes.

Broken clasp on the closure of the dryer pedestal.

On a Friday, I ordered the replacement part, which was easy to find on the appliance Parts Pros website. It came the very next day!

Dryer latch (female end) was missing.

I watched the video on the appliancepartspros.com that showed how to fix the latch. I then went and snapped in the clip (that came in the kit) into the dryer door. Ran the dryer the door stayed shut. Dryer fixed!!!

Door would open while dryer was on.

I looked up the problem on YouTube and saw that it was a simple fix. I went to Google Search for the part and appliancepartpros.com come up, I clicked. Their site is so convenient. All I did was input the model number and then the part name. They even have how to videos on the repairs. Bought the part and I got the part within a couple days. Took me 20 minutes to repair.

Little clips that hold the front onthe washer and dryer pedestal were missing

Used Appliance Parts Pros on line chat. Service rep found the parts for me ($4) and took my order. Problem solved.

Fast same day shipping
365 days to return any parts

Door Latch Kit for Whirlpool WED5840SW0 Shuts off too soon

$4.32 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP3094183
Fast shipping:
Yes
Returns:
365 days to return

This Dryer Door Latch Kit is an OEM replacement part compatible with Whirlpool dryers.  

Features and Benefits:

  • Designed to secure the dryer door during operation and prevent accidental opening
  • Helps to maintain safe and efficient dryer operation
  • Easy to install with basic tools, ideal for DIY maintenance

 The Door latch kit includes:

  • 3 different door catches to fit your specific model, green, yellow and blue.
  • 2 strikes
  • Instruction sheet

 Please refer to your appliance's parts list to verify compatibility.

25% of the time Thermal Cut-Off Kit

Clothes dryer wasn t heating

Preface: I have never done anything like this before. My ten year old Whirlpool dryer (electric) ran perfectly except that it suddenly stopped heating. I went on youtube and your website, watched a few videos and thought to myself "I can probably do this." I ordered a thermal fuse via your instant chat feature which proved to be a mistake. As soon as it arrived I knew it didn't look like the part I needed so I called AppliancePartsPros.com and learned that the part I needed was actually called a thermal cut-off. It arrived in a couple of days and was installed in about ten minutes. I am happy to report that with your help the dryer in running like new. Thank you.

Dryer quit drying

As on previous occasions, got online with Appliance Parts Pro and easily & quickly learned how to determine the problem, find the parts needed, how to remove the failed part and how to install its replacement. Hard to believe how convenient and efficient this company is.

No heat

I bought those parts tuesday they were here thursday morning had my dryer working great by noon thursday.

Whirlpool dryer wouldn't heat

I found your website with complete detailed instructions for troubleshooting the dryer. After I identified the problem, I was able to watch the video showing the repair and then order the part. Easy as pie, and I knew nothing about dryers. Your website saved me a bundle on technician labor fees.

Dryer was working but there was no heat

I was new to these repairs and not very skilled with the multi-meter. The thermal cut off switch was bad.

No heat

Simple diagnosis, checked for open heating coil, was ok, then checked and found open thermostat. Easy to replace.

Fast same day shipping
365 days to return any parts

Thermal Cut-Off Kit for Whirlpool WED5840SW0 Shuts off too soon

$32.36 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP3094244
Fast shipping:
Yes
Returns:
365 days to return

If your Whirlpool dryer or washer/dryer combo is not functioning properly, it may be due to a damaged thermal cut-off. This thermal cut off kit is an authentic OEM replacement kit that is designed to prevent the dryer from overheating.

Made of durable metal. Both components are mounted on the heater housing. They measure approximately 2 inches long and 1.5 inches wide each. If the thermal cut-off fuse has gone out, the dryer will not function but replacing it using the components in this kit is simple.

This Kit Includes:

  • High Limit Thermostat (250°F Limit)
  • A Cut Off Fuse (309°F Limit)
  • Female Spade Terminals
  • Jumper Wires

It is important to note that a plugged lint screen, something stuck in the exhaust vent, or a broken blower wheel can cause the thermal cut-off to fail or become damaged. Don't wait to replace a faulty thermal cut-off. Order now.

23% of the time Dryer Drive Motor

Motor was humming and not running

However, it would run if I gave the motor shaft a spin. Suspected either a starting relay or capacitor. Soon leaned that it integral part of the motor. So I had to replace the motor which fixed the issue.

My whirlpool dryer motor died

I looked at your repair video and ordered the replacement part. The motor arrived quickly and I replaced the motor. Unfortunately the fan broke while removing the old one (this I understood sometimes happens) but was easily replaced as well. I was so proud of my work and the wife was so proud of me. By ordering the parts and doing the work myself I saved hundreds of dollars by not having to buy a new dryer. Repair was also so much better for the environment without having to throw away the old dryer! I am not a repairman and don't have much handy experience but the video made the repair a snap!

Bad dryer moter

Disassembled dryer to get down to the motor. Had to chisel blower wheel off motor. Picked up wheel locally and assembled back together again.

Dryer drive motor

First dryer stopped working. When I went to restart there was a humming noise. I unloaded the dryer. Turned on the dryer and it made a humming noise again but it worked. When I put a load in the dryer it made a humming noise and wouldn't start. I ordered a Dryer motor from AppliancePartsPros.com. I paid for next day delivery. I went back to the website and it has a video showing how to install it. It took about twenty minutes to install the new motor and it worked great! I have used AppliancePartsPros.com also to fix my washer in the past. My appliances are over 21yrs old and work great! Thanks to AppliancePartsPros.com. This last repair cost me $128.00 including next day delivery, instead of a $1,000 dollars for a new dryer. Great Service.

Electric dryer making loud noise and would stop running after only a few minutes.

I replaced the dryer motor and blower fan. The blower fan had to be chiseled off the dryer motor shaft. Would suggest anyone replacing the dryer motor on an older dryer to order a blower fan ($20) with the motor just in case it won't screw off the motor shaft. If you don't need the blower fan simply return it for a refund.

Fast same day shipping
365 days to return any parts

Dryer Drive Motor for Whirlpool WED5840SW0 Shuts off too soon

$72.11 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP3094245
Fast shipping:
Yes
Returns:
365 days to return

The Dryer Drive Motor is an OEM replacement part compatible with Whirlpool dryers. This high-quality motor features a durable construction and provides reliable performance, ensuring your dryer runs smoothly.

Recommended related items:

  • Belt 341241
  • Idler pulley WP691366
  • Drum rollers 349241T

Causes of a bad part:

  • Overheating
  • Wear and tear
  • Electrical failures

Symptoms of a bad part:

  • Dryer drum not turning
  • Unusual noise
  • Burning smell

This OEM replacement motor is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

8% of the time Hi-Limit Thermostat

My dryer was blowing cool air and not hot to dry my clothes

I went online and saw a video from AppliancePartsPros.com. The gentlemen showed me exactly what I needed to fix my dryer and exactly how to repair it. His directions were so easy to follow. I ordered the parts from AppliancePartsPros website and installed them and my dryer is working better than before. I only spent $91.00 to repair instead of purchasing a new dryer for $699.00. Thank you so much for saving me over $600.00.

Dryer not heating up.

After finding out vent was plugged. Cleaned vent & still no heat, I replaced the hi-limit thermostat because the heating element would come on for a few seconds & shut off not geting up to temp to dry. Seems okay now.

Dryer overheating

Learned it was the Hi-limit thermostat and order one. Absolutely no sweat taking the old one out and putting the new one in. Watch their videos. Nothing to it.

The dryer would not heat.

After watching a video on Youtube, I used a multimeter to test continuity in each of the thermostats. The hi-limit thermostat failed. I ordered the part late one evening with overnight shipping. The part shipped the next day and arrived on time. It took just a few minutes to install the part and start drying clothes again. AppliancePartsPros.com is an EXCELLENT source for parts!

Dyer works but not heating.

Troubleshooting resulted in one of the thermostat ( the high limit) being open. Priced the item at local sources, and the prices were all at least double that of Applianceparts.com Ordered the part, it arrived a couple of day before the scheduled date. Tested the part before installation. Now the machine works as it should. Thanks for being available to assist and especially with lower prices.

Fast same day shipping
365 days to return any parts

Hi-Limit Thermostat for Whirlpool WED5840SW0 Shuts off too soon

$16.22 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP6009043
Fast shipping:
Yes
Returns:
365 days to return

Restore your dryer's safety and performance with this Hi-Limit Thermostat. The Whirlpool brand OEM replacement part is designed to prevent overheating and keep your appliance running. This 3-wire thermostat is equipped with 1/4" male, 3/16" male, and 1/4" female connectors. It has been designed to operate at a temperature rating of L221 degrees. 

The thermostat includes a terminal extension arm for easy installation. This vital component maintains proper temperature by opening at around 250 degrees Fahrenheit. Safety features such as this keep your dryer safe from potential damage.

If you suspect a thermostat malfunction causing your dryer to lose heat, first locate it. The thermostat is located beneath the dryer vent at the back of the appliance. Test the thermostat for continuity at room temperature using a multimeter. If the reading indicates a defective thermostat, replace it.  Purchase this high-quality, silver/black metal and plastic model to restore your dryer's safety.

7% of the time Dryer Door Switch

Door switch

Watched video and all went ok ,except the lid was very hard to get un-snapped to lift. the directions should include warning to give a clue to apply force .

Dryer would not shut off when the dryer door was opened

That led me to think that the door switch was bad and an ohm meter showed it was bad. The new switch I received from A.P.P. fixed the problem.

Dryer door switch

I Order the switch from Appliance Parts Pro on Sunday. Received part on Tuesday approx 3pm, by 3:15 pm the switch was installed and dryer was working. Fastest service I have ever had. The replacement part was exactly like the one that came out even the same part number, with instruction how to install. When I need appliance parts I will order from this company.

Dryer door switch

My boyfriend ordered it from your website and it arrived in two days with standard s + h. The video helped immensely.

Broken dryer door switch

Easy fix using the instructions. Remove filter, unscrew 2 screws holding filter frame to the lid, popped open the lid, unplug and unscrew old switch, insert new switch, etc. Quick, cheap and easy.

Whirlpool dryer wouldn't start

After taking the back off to see if there was anything obvious, like burnt wires, I noticed that the light in the drum was on. This was like if the door was open. I checked the door switch and the lever was broken off. I ordered the new switch from AppliancePartsPros.com and installed it and the problem was solved. Thanks for being there for me at an affordable price, guys. I will be a return customer and will recommend your company to anyone in need.

Broken dryer door swich

I ordered the part from AppliancePartsPros.com and received it 2 days later. The new part fit perfectly and worked correctly.

Maytag dryer door switch shorted, light wouldn't go on and dryer kept running when door opened

Very easy fix to replace the switch, thanks to the excellent U tube video from appliance pros. Took about 10 minutes. Screwdriver and a putty knife.

Dryer drum stayed on when door opened and light did not come on

Logged onto AppliancePartsPros site, used their trouble shooting guide and BAM. Got the right part at right price, RIGHT NOW. Great service!

Dryer door switch

Replace the switch. Quick and easy. I was going to call a repair man, but then I looked at a video on the appliance site and said I can do this so I did end of the story.

Fast same day shipping
365 days to return any parts

Dryer Door Switch for Whirlpool WED5840SW0 Shuts off too soon

$21.50 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP6008561
Fast shipping:
Yes
Returns:
365 days to return

The Whirlpool Dryer Door Switch is an OEM replacement part that is compatible with a wide range of Whirlpool, Kenmore, and Maytag dryer models. This high-quality replacement part ensures that your dryer door is properly closed, allowing your appliance to operate smoothly and efficiently. 

If you're experiencing any of the following symptoms, it's time to replace your dryer door switch. Don't wait until your dryer stops working altogether – replace this part today and get your appliance back to peak performance! 

Causes of a bad part:

  • Wear and tear from regular use
  • Moisture damage from the dryer's steam cycle

2% of the time Moisture Sensor

Moisture sensor on dryer door wasn’t working.

Purchased a new sensor and used the video that showed me how. While I had the back off the dryer I completely cleaned all the lint from the inside. The video was very helpful. Reassemble the dryer and did a load of laundry and it worked perfectly. Saved me a large repair bill.

Moisture sensor.

Followed the videos supplied. Super easy. Also, you can't imagine the amount of lint in you dryer. Worth cleaning annually.

Moisture sensor was missing.

Unplugged the power. Removed the lint filter and two screws in lint filter opening (Phillips head screwdriver). Disconnected exhaust vent hose (5/16 nut driver). Removed back cover (1/4” nut driver). Removed metal vent duct underneath cover (1/4 nut driver). Installed the new moisture sensor (no tools), using scotch tape to hold it in place until the retaining pins were in place. Replace parts in reverse order. Don’t tighten screws until all are in place, so they’ll all line up. Tips: The long ends of the sensor (user installed) are on opposite sides. The thick part of the sensor goes toward the top of the dryer. I didn’t need to lift the dryer lid.

Fast same day shipping
365 days to return any parts

Moisture Sensor for Whirlpool WED5840SW0 Shuts off too soon

$55.74 In Stock, Ships Monday
Add to cart
Made by:
Whirlpool
Part Number:
AP3094143
Fast shipping:
Yes
Returns:
365 days to return

This Moisture Sensor is an OEM part compatible with Whirlpool dryers. Positioned inside the dryer drum, the sensor detects the moisture level of clothes during the drying cycle. By assessing the dampness of the load, it adjusts the drying time to prevent over-drying, which can be harmful to fabrics, or under-drying, which leaves clothes damp.

Common reasons for the degradation or malfunction of the Moisture Sensor include prolonged use, where the sensor's ability to accurately detect moisture can diminish. Lint and fabric softener residue accumulation on the sensor bars might also interfere with its performance.

Symptoms of a malfunctioning Moisture Sensor are:

Clothes remain damp after a complete drying cycle.

  • The dryer consistently over-dries, resulting in hot or shrunken clothes.
  • Drying cycles end prematurely.
  • The sensor error light, if present, might illuminate.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.